SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Parts for Forklift - Sooner or later, forklift parts would wear and need to be replaced. Acquiring brand new components could become a costly venture so one more idea is to acquire used forklift components. This could save much money in the long run. It is a great idea to acquire used forklift parts which have been reproduced. These parts would ensure that you are getting components that will work for a long time and be productive.
Remanufacturing worn out or broken parts is a less expensive method in general as opposed to rebuilding. With rebuilding parts, only the parts that are worn out or broken get changed, which means that other wearable parts can break down soon after acquisition.
Remanufactured parts are cleaned after being taken apart and have the unusable components changed. This technique can provide the best assurance for used parts. All wearable components are replaced regardless of age or wear which is another rationale why reproduced components in general work so much better. Whichever part within the part is new and this provides much longer life to the second-hand part. Depending on the forklift parts which are being redone, the cleaning process and the complete remanufacturing process would vary.
The engines are cleaned after a complete disassembly. Various engine parts like pistons, spark plugs, rings, filters, valves, and valve springs can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are one more thing which is oven cleaned after being disassembled. The transmission is then washed. A complete examination is done to be able to check for any cracks. Bushings, seals and bearings are all replaced. Normally, the replacement components used on transmission parts meet OEM specifications.
Some lift truck parts like for example the alternator, the water pump, torque converters, the starter and steer axles can be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could likewise be remanufactured with replacing all aged and worn out parts. Unlike several forklift components the control card can only have the worn and aged components replaced.
Components that are reproduced have to be thoroughly inspected upon reassembly to guarantee they are in good condition before being sold. When acquiring these components, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain larger components like for example engines, transmissions and steer axles, OEM specification replacement components should be utilized.
The dealer of used forklifts and parts can ensure that the reproduced components have met OEM specifications and that these components meet industry standards. Lots of details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of reproduced parts compared to the components that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 949-344-2070
3972 Barranca Parkway J-124
Irvine, California
forkliftpartsirvine.com
Email Us
About Us